dmesg - Intel Xeon E5-2620 v4

Return To Intel Xeon E5-2620 v4 System Information

Linux version 4.11.9-1-ARCH (builduser@tobias) (gcc version 7.1.1 20170621 (GCC) ) #1 SMP PREEMPT Wed Jul 5 18:23:08 CEST 2017
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007effefff] usable
BIOS-e820: [mem 0x000000007efff000-0x000000007effffff] reserved
BIOS-e820: [mem 0x00000000fc000000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Xen HVM domU, BIOS 4.10-unstable 06/13/2017
Hypervisor detected: Xen
Xen version 4.10.
Xen Platform PCI: I/O protocol version 1
Netfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated NICs.
Blkfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated disks.
               You might have to change the root device
               from /dev/hd[a-d] to /dev/xvd[a-d]
               in your root= kernel command line option
HVMOP_pagetable_dying not supported
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x7efff max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF write-combining
  C0000-FFFFF write-back
MTRR variable ranges enabled:
  0 base 0000F0000000 mask 3FFFF0000000 uncachable
  1 disabled
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
found SMP MP-table at [mem 0x000f67a0-0x000f67af] mapped at [ffff8800000f67a0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
BRK [0x01d43000, 0x01d43fff] PGTABLE
BRK [0x01d44000, 0x01d44fff] PGTABLE
BRK [0x01d45000, 0x01d45fff] PGTABLE
BRK [0x01d46000, 0x01d46fff] PGTABLE
BRK [0x01d47000, 0x01d47fff] PGTABLE
RAMDISK: [mem 0x374a9000-0x37a4bfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F66F0 000024 (v02 Xen   )
ACPI: XSDT 0x00000000FC00A960 000054 (v01 Xen    HVM      00000000 HVML 00000000)
ACPI: FACP 0x00000000FC00A610 0000F4 (v04 Xen    HVM      00000000 HVML 00000000)
ACPI: DSDT 0x00000000FC0015E0 008FAC (v02 Xen    HVM      00000000 INTL 20140214)
ACPI: FACS 0x00000000FC0015A0 000040
ACPI: FACS 0x00000000FC0015A0 000040
ACPI: APIC 0x00000000FC00A710 0000E0 (v02 Xen    HVM      00000000 HVML 00000000)
ACPI: HPET 0x00000000FC00A870 000038 (v01 Xen    HVM      00000000 HVML 00000000)
ACPI: WAET 0x00000000FC00A8B0 000028 (v01 Xen    HVM      00000000 HVML 00000000)
ACPI: SSDT 0x00000000FC00A8E0 000031 (v02 Xen    HVM      00000000 INTL 20140214)
ACPI: SSDT 0x00000000FC00A920 000031 (v02 Xen    HVM      00000000 INTL 20140214)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000007effefff]
NODE_DATA(0) allocated [mem 0x7effa000-0x7effefff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x000000007effefff]
  Normal   empty
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009efff]
  node   0: [mem 0x0000000000100000-0x000000007effefff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000007effefff]
On node 0 totalpages: 520093
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3998 pages, LIFO batch:0
  DMA32 zone: 8064 pages used for memmap
  DMA32 zone: 516095 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xb008
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
e820: [mem 0x7f000000-0xfbffffff] available for PCI devices
Booting paravirtualized kernel on Xen HVM
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 35 pages/cpu @ffff88007c200000 s103256 r8192 d31912 u262144
pcpu-alloc: s103256 r8192 d31912 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
xen: PV spinlocks enabled
PV qspinlock hash table entries: 256 (order: 0, 4096 bytes)
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 511944
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2025820K/2080372K available (6485K kernel code, 1091K rwdata, 2020K rodata, 1304K init, 904K bss, 54552K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Preemptible hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 64.
	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=16.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=16
NR_IRQS:8448 nr_irqs:960 16
xen:events: Using FIFO-based ABI
xen:events: Xen HVM callback vector for event delivery is enabled
Console: colour VGA+ 80x25
console [tty1] enabled
console [ttyS0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 30580167144 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2097.523 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4196.95 BogoMIPS (lpj=6991933)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170119
ACPI: 3 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 2 MCE banks
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 24K
ftrace: allocating 25552 entries in 100 pages
smpboot: Max logical packages: 1
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
Xen: using vcpuop timer interface
installing Xen timer for CPU 0
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz (family: 0x6, model: 0x4f, stepping: 0x1)
cpu 0 spinlock event irq 53
Performance Events: unsupported p6 CPU model 79 no PMU driver, software events only.
NMI watchdog: disabled (cpu0): hardware events not enabled
NMI watchdog: Shutting down hard lockup detector on all cpus
smp: Bringing up secondary CPUs ...
installing Xen timer for CPU 1
x86: Booting SMP configuration:
.... node  #0, CPUs:        #1
cpu 1 spinlock event irq 59
installing Xen timer for CPU 2
  #2
cpu 2 spinlock event irq 65
installing Xen timer for CPU 3
  #3
cpu 3 spinlock event irq 71
installing Xen timer for CPU 4
  #4
random: fast init done
cpu 4 spinlock event irq 77
installing Xen timer for CPU 5
  #5
cpu 5 spinlock event irq 83
installing Xen timer for CPU 6
  #6
cpu 6 spinlock event irq 89
installing Xen timer for CPU 7
  #7
cpu 7 spinlock event irq 95
installing Xen timer for CPU 8
  #8
cpu 8 spinlock event irq 101
installing Xen timer for CPU 9
  #9
cpu 9 spinlock event irq 107
installing Xen timer for CPU 10
 #10
cpu 10 spinlock event irq 113
installing Xen timer for CPU 11
 #11
cpu 11 spinlock event irq 119
installing Xen timer for CPU 12
 #12
cpu 12 spinlock event irq 125
installing Xen timer for CPU 13
 #13
cpu 13 spinlock event irq 131
installing Xen timer for CPU 14
 #14
cpu 14 spinlock event irq 137
installing Xen timer for CPU 15
 #15
cpu 15 spinlock event irq 143
smp: Brought up 1 node, 16 CPUs
smpboot: Total of 16 processors activated (67256.95 BogoMIPS)
sched_clock: Marking stable (1786666489, 0)->(70255440945408, -70253654278919)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 4096 (order: 6, 262144 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 17:13:17, date: 07/17/17
NET: Registered protocol family 16
xenbus: xs_reset_watches failed: -38
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
xen: --> pirq=16 -> irq=9 (gsi=9)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
acpiphp: Slot [9] registered
acpiphp: Slot [10] registered
acpiphp: Slot [11] registered
acpiphp: Slot [12] registered
acpiphp: Slot [13] registered
acpiphp: Slot [14] registered
acpiphp: Slot [15] registered
acpiphp: Slot [16] registered
acpiphp: Slot [17] registered
acpiphp: Slot [18] registered
acpiphp: Slot [19] registered
acpiphp: Slot [20] registered
acpiphp: Slot [21] registered
acpiphp: Slot [22] registered
acpiphp: Slot [23] registered
acpiphp: Slot [24] registered
acpiphp: Slot [25] registered
acpiphp: Slot [26] registered
acpiphp: Slot [27] registered
acpiphp: Slot [28] registered
acpiphp: Slot [29] registered
acpiphp: Slot [30] registered
acpiphp: Slot [31] registered
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfbffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
pci 0000:00:01.1: reg 0x20: [io  0xc200-0xc20f]
pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
pci 0000:00:01.3: quirk: [io  0xb000-0xb03f] claimed by PIIX4 ACPI
pci 0000:00:01.3: quirk: [io  0xb100-0xb10f] claimed by PIIX4 SMB
pci 0000:00:02.0: [5853:0001] type 00 class 0xff8000
pci 0000:00:02.0: reg 0x10: [io  0xc000-0xc0ff]
pci 0000:00:02.0: reg 0x14: [mem 0xf0000000-0xf0ffffff pref]
pci 0000:00:03.0: [1234:1111] type 00 class 0x030000
pci 0000:00:03.0: reg 0x10: [mem 0xf1000000-0xf1ffffff pref]
pci 0000:00:03.0: reg 0x18: [mem 0xf2050000-0xf2050fff]
pci 0000:00:03.0: reg 0x30: [mem 0xf2040000-0xf204ffff pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
ACPI: Enabled 2 GPEs in block 00 to 0F
xen:balloon: Initialising balloon driver
xen:manage: Unable to read sysrq code in control/sysrq
xen_balloon: Initialising balloon driver
pci 0000:00:03.0: vgaarb: setting as boot VGA device
pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:03.0: vgaarb: bridge control possible
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7efff000-0x7fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 62.500000 MHz counter
random: crng init done
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 489568
Policy zone: DMA32
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 489568
Policy zone: DMA32
clocksource: Switched to clocksource xen
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io  0x08a0-0x08a3] has been reserved
system 00:01: [io  0x0cc0-0x0ccf] has been reserved
system 00:01: [io  0x04d0-0x04d1] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
xen: --> pirq=17 -> irq=8 (gsi=8)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
xen: --> pirq=18 -> irq=12 (gsi=12)
pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
xen: --> pirq=19 -> irq=1 (gsi=1)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
xen: --> pirq=20 -> irq=6 (gsi=6)
pnp 00:05: [dma 2]
pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
xen: --> pirq=21 -> irq=4 (gsi=4)
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:07: [io  0xae00-0xae0f] has been reserved
system 00:07: [io  0xb044-0xb047] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xf0000000-0xfbffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 5772K
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
workingset: timestamp_bits=40 max_order=19 bucket_order=0
zbud: loaded
Key type asymmetric registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
intel_idle: does not run on family 6 model 79
GHES: HEST is not enabled!
xen: --> pirq=22 -> irq=24 (gsi=24)
xen:grant_table: Grant tables using version 1 layout
Grant table initialized
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one day, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
xenbus_probe_frontend: Device with no driver: device/vbd/51712
xenbus_probe_frontend: Device with no driver: device/vkbd/0
xenbus_probe_frontend: Device with no driver: device/vif/0
  Magic number: 9:255:239
rtc_cmos 00:02: setting system clock to 2017-07-17 17:13:18 UTC (1500311598)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1304K
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1692K
Freeing unused kernel memory: 28K
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
SCSI subsystem initialized
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
libata version 3.00 loaded.
ata_piix 0000:00:01.1: version 2.13
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc200 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc208 irq 15
blkfront: xvda: flush diskcache: enabled; persistent grants: enabled; indirect descriptors: enabled;
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
 xvda: xvda1
FDC 0 is a S82078B
EXT4-fs (xvda1): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 233 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN default-hierarchy=hybrid)
systemd[1]: Detected virtualization xen.
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
tsc: Refined TSC clocksource calibration: 2097.582 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e3c4460089, max_idle_ns: 440795269069 ns
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Swap.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
EXT4-fs (xvda1): re-mounted. Opts: data=ordered
systemd-journald[255]: Received request to flush runtime journal from PID 1
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-16 Joules
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input3
ACPI: Sleep Button [SLPF]
xen_netfront: Initialising Xen virtual ethernet driver
input: PC Speaker as /devices/platform/pcspkr/input/input4
piix4_smbus 0000:00:01.3: SMBus Host Controller not enabled!
input: Xen Virtual Keyboard as /devices/virtual/input/input5
input: Xen Virtual Pointer as /devices/virtual/input/input6
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
mousedev: PS/2 mouse device common for all mice
EDAC MC: Ver: 3.0.0
EDAC sbridge: Seeking for: PCI ID 8086:6fa0
EDAC sbridge:  Ver: 1.1.1 
[drm] Found bochs VGA, ID 0xb0c0.
[drm] Framebuffer size 16384 kB @ 0xf1000000, mmio @ 0xf2050000.
[TTM] Zone  kernel: Available graphics memory: 1017518 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
fbcon: bochsdrmfb (fb0) is primary device
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain dram
intel_rapl: DRAM domain energy unit 15300pj
intel_rapl: RAPL package 0 domain package locked by BIOS
ppdev: user-space parallel port driver
Console: switching to colour frame buffer device 128x48
bochs-drm 0000:00:03.0: fb0: bochsdrmfb frame buffer device
[drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:03.0 on minor 0
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input7
serial8250: too much work for irq4
serial8250: too much work for irq4
serial8250: too much work for irq4
serial8250: too much work for irq4
serial8250: too much work for irq4
serial8250: too much work for irq4
serial8250: too much work for irq4
serial8250: too much work for irq4
serial8250: too much work for irq4
serial8250: too much work for irq4
serial8250: too much work for irq4
serial8250: too much work for irq4
serial8250: too much work for irq4
serial8250: too much work for irq4

Return To Intel Xeon E5-2620 v4 System Information